Laser 8336 2 Piece Spot Weld Removal Set

Laser 8336 2 Piece Spot Weld Removal Set

Features and Benefits:

• This set incorporates an automatic centre punch together with a 8mm HSS drill bit, which features a spring-loaded guide pin, and is designed to drill out or cut through spot-welds allowing for the weld to be broken and the welded panels taken apart.
• The centre punch is used to make an indent at the centre of the spot-weld, before offering up the drill bit to the weld.
• The guide pin then sits in the indent and keeps the drill bit steady and centralised as it drills through the spot-weld.
• Designed to drill out spot welds using air powered or electric drills.
• The spot weld drill allows the top layer of the weld to be 'machined' away in a controlled manner leaving the second skin intact ready for the new panel to be fitted.
• 8mm HSS drill bit with integral spring loaded centre point.
• Automatic centre punch to create indent at centre of spot weld.
• The automatic centre punch does not require the use of a hammer so reducing the chance of deforming surrounding panel work.
• Always wear eye protection.​​​​​​​